Sunday, 19 March 2017

Last Minute Panic!


 The newly refurbished outdrives have now been refitted but not without some major problems with getting the hook up fork pin retaining bolts back in place. After taking up the kind offer of using Mar Y Sol's, unfortunately those were just as worn as ours. This then resulted in a quick trip to Screwfix to purchase an M8 Tap & Die to clean the threads up  in a last minute panic, as the yard had already loaded Moonshine onto the boat mover.  It probably would be good practice to replace these for what they cost each time the drives are removed, too late now but these can be sourced and stored away for next time.

 
Moonshine is now all set for her relaunch this morning.

Sunday, 5 March 2017

Changing Colours


 
 

Last week Moonshine's Hull was compounded and machine polished to a good shine over the course of three days.  Once the polishing had been completed the antifouling was applied.  This year we have changed from blue to navy blue International Cruiser Uno EU.

 

Yesterday we stripped the old rubber insert from the stainless steel rubbing strake, and fitted a new rubber which we obtained from Trend Marine. 

 

This new rubber smartened the strake up no end and we are really pleased with this. 

 

The transom shields are all prepared ready for the newly refurbished drives to be fitted.  Also new anodes have been fitted to the trim tabs.  We now have just a few more minor jobs left to do prior to our relaunch on the 20th March, fingers crossed she will still float.

Saturday, 18 February 2017

As Good As New

Ignore the carrot control...

Due to busy work commitments we have been unable to find the time to keep people updated on the winter maintenance of Moonshine, until now.


Peter went down to I.V.S.S Marine in Sandwich, Kent 2 weeks ago, to collect the newly overhauled outdrives. 
The drives have been shot blasted to bare metal, a full strip down and rebuild, and full repaint in two pack paint.



We are really pleased with the standard of workmanship on the drives.  They are returned ready to fit to the boat, filled with oil, hook up bushes, new anodes, new decals fitted and the UJ joints come fitted with a grease nipple to ensure a long service life, something which Volvo do not fit as standard.
It is nice to deal with a reputable firm that do excellent standard work at a fair price.  We are very much looking forward to these being refitted in a few weeks time prior to relaunch, and hopefully Moonshine will be as good as new once again.

Monday, 9 January 2017

Poor Maintainance

Over the last few weekends since Moonshine's outdrives were taken to Kent for overhaul, work has been slowly progressing. 


The monotonous task of wet and dry sanding of the antifoul has been undertaken which has taken a good few days, but the results are good and her hull is now lovely and smooth and ready for antifouling nearer the lift in.

The boot topping has been rubbed down and two coats of paint reapplied so it can harden over the coming weeks.

Another two days work involved buffing up the stainless steel rubbing strake, which looks nice.  Prior to re-launch we will fit a new rubber insert (to be obtained from Trend Marine).

While the outdrives were off, we have taken the opportunity to replace the steering bushes and seals.  This should have been a straight forward task, however the grub screws locking the steering arms to the shaft were seized solid, one of them rounded off and the hexagon bit snapped off in the other.  We have managed to drill the rounded screw out and remove the steering folk, but could not do the same with the other, this has resulted after a lot of 'head scratching and a call to I.V.S.S Marine) in cutting the arm off with a grinder. This was not easy in the tight confines of the engine room and will result in a new steering arm at around £135. This would all have been avoided if these had been properly maintained and reassembled with grease last time they were apart....indeed we do have a receipt on board claiming these had been changed by a marine engineer shortly prior to us purchasing Moonshine, but we don't think these have been looked at in years!

Sunday, 11 December 2016

Tense Times Ahead....



Last Saturday the toilet was removed to enable us to dig out the old silicone in the toilet recess and replace with new. 
Whilst the toilet was off the boat the opportunity was taken to strip, clean and service it ready for next season. The inlet pipe was replaced so that all the pipework on the waste system has now been replaced for new.

On Friday Peter took both outdrives down to I.V.S.S Marine in Sandwich, Kent for overhaul.  The owner showed Peter around his workshops, and he was very impressed with the workmanship of some completed refurbished drives and overhauled engines.  Our outdrives will be going for shot blasting later this coming week after they have had an initial inspection to make sure the gears etc are ok...it is uncommon, but it was the owners duty to advise us that if the gears were chipped then this would add a considerable amount onto the repair bill.  Hopefully the gears will be ok, but we are now prepared for the worst should the situation arise.  The timescale quoted would be 4 to 5 weeks.
He did state that they had been repaired before, but reassembled very badly with items such as spacers on the steering swivels missing. However he did also suggest that this was most probably where our recent overheating issues lay, as air can be drawn into the swivel when the boat is planing as it is no longer submerged. Tense times lay ahead until he rings us this week with the verdict....

Sunday, 4 December 2016

Legless



On Friday Moonshine was pulled out of the water for her annual winter maintenance programme.

 

We have also removed both outdrives, which are to be overhauled, leaving Moonshine 'legless'.  We have been putting this off for the last two years due to the cost, but Peter hopes to take these down to I.V.S.S Marine in Kent next Friday.  This will be an expensive job but one that is well overdue and will be very worthwhile and cost effective in the long term, and will be as good as new once fully refurbished. 

 

A few weeks ago on our final cruise of the year we discovered the Raymarine C80 MFD chart plotter screen had decided to start playing up. After checking the dash connections the unit was taken home and dismantled and after a quick check of the ribbon tape connections to the screen (which has been known to play up on this type of plotter) were made secure, and  since the unit is well out of warranty it was a risk worth taking. Luckily after refitting the chart plotter it is still working, but if it decides to play up again it may be on a return ticket to Raymarine to be fixed.

Monday, 21 November 2016

Winding Down




Over the last few weeks we have been winding down our boating activities, and taking home any unnecessary items in anticipation for Moonshine's winter lift out i.e. dingy, outboard, generator, bbq and large ball fenders, along with a good clear out of the food and wine cupboard which was also undertaken. The new lifejackets and tv remotes are also going home to a nice warm dry environment...every little helps as they say, and we hope Moonshine will be a tad lighter for her winter hard standing period.  We have also replaced during the week the engine lubricating oil and filters so that the engines are stood with fresh new oil over the winter.
On Saturday lunch we ventured up to the moorings at Sykehouse Lift Bridge to give Moonshine her last run prior to lifting out in the next few weeks, and after a very cold and frosty start we enjoyed a pleasant run with the sun coming out gracing us with her presence.
The Raymarine C80 MFD chart plotter screen decided to start playing up whilst underway, after a quick check of the connections there was still no joy but miraculously the screen decided to function fully on our return back to our mooring. However airing on the side of caution we have removed the unit from the dash and will delve inside to make sure there isn't a loose connection such as the tape ribbon connection to the screen which has been known to play up on this type of plotter, and since the unit is well out of warranty we can investigate further when we have time. Annoying as this is it could have been in the middle of the boating season when we needed it most. 
 


After our main holidays the old stainless steel holding tank was cut away and removed as this had become porous and had started weeping.  We decided a much smaller tank would be better suited, so after a lot of measuring and further investigation we decide on a 110 litre Vetus nylon tank. This particular tank can be used for a variety of purposes i.e. drinking water, diesel and in our case waste water. 
  
 

We took the opportunity to create a storage rack, which can hold 4x 25 litre diesel containers. This sits above the new tank, which is straddled by a wooden frame which supports the rack and holds the tank securely in place.
 


The Wema level sender unit from the old tank had failed, so we sourced a new (old stock) Osculati level indicator panel and sender for considerably less than a Wema sender unit alone. The only problem we encountered was the loom was about 4 meters too short so a new loom was made.
 
Finally, on checking the log, we have worked out Moonshine has logged  a very respectable 1401.8 nautical miles this year....only 23 NM less than last year.